Walk-In Closet Dubai
Fitted Wardrobe Cost Dubai | AED Price Breakdown 2026
Pricing Guide2026-06-19

Fitted Wardrobe Cost Dubai | AED Price Breakdown 2026

Fitted wardrobe cost in Dubai ranges from AED 3,500 to AED 25,000+ for a standard bedroom unit. The price difference between a basic and a premium wardrobe is not arbitrary — each number reflects a specific combination of board specification, door system, hardware, and finish. This guide breaks down what drives the cost and what each spend tier actually delivers.

What Is the Average Fitted Wardrobe Cost in Dubai?

The most common residential project, a 3.0m-4.0m wide floor-to-ceiling bedroom wardrobe with sliding doors, typically costs AED 6,000-12,000 in a mid-range melamine finish. For a full walk-in wardrobe room, costs start from AED 15,000 and reach AED 50,000+ for premium lacquer specifications. See the walk-in closet cost page for a walk-in pricing breakdown.

These figures are for the completed, installed wardrobe — materials, manufacturing, Dubai delivery, and installation included. They exclude structural preparation work such as removing an existing wardrobe, wall adjustments, or electrical work for integrated lighting (which adds AED 500-2,500 depending on complexity).

Fitted Wardrobe Cost in Dubai by Size

The most direct cost driver is linear metres of carcass. Standard pricing in Dubai is quoted per linear metre, not per door or per unit:

  • Economy melamine, hinged doors: AED 900-1,400 per linear metre. Standard 18mm board, basic hinges, no soft-close drawers. Suitable for secondary bedrooms or utility storage.
  • Mid-range melamine, sliding doors: AED 1,400-2,200 per linear metre. 18mm moisture-resistant MDF, aluminium sliding door frame, Blum soft-close hinges on internal fittings, 1-2 drawer banks.
  • Matt lacquer, sliding doors, full internal fit: AED 2,500-4,000 per linear metre. Sprayed lacquer doors in a custom colour, premium sliding system, Blum Tandembox drawers, LED strip lighting under shelves, soft-close throughout.
  • High-gloss lacquer or glass doors, premium hardware: AED 4,000-6,500 per linear metre. Two-pack polyurethane lacquer in high-gloss or deep matt, glass panels, Blum Legrabox drawer system, integrated LED with motion sensor.

A 3.6m bedroom wardrobe at mid-range specification costs approximately AED 5,040-7,920. The same wardrobe in full lacquer costs AED 9,000-14,400. Most Dubai bedroom wardrobe projects land between AED 6,000 and AED 14,000.

What Drives Fitted Wardrobe Cost in Dubai?

Five factors account for most of the cost variation between fitted wardrobe quotes:

Board specification. Standard MDF and moisture-resistant (MR) MDF look identical but cost approximately AED 15-30 per square metre more for MR. In Dubai's climate, standard MDF risks swelling and delamination at the high humidity months of July-August. The MDF wardrobe guide covers specification in detail. All quality fitout companies in Dubai use MR-MDF as standard.

Door system. Hinged doors cost less than sliding doors. The sliding door frame and track system adds AED 800-1,800 to a typical wardrobe, depending on frame quality. German-profile aluminium tracks (Hawa, Mantion, or equivalent) perform and look significantly better than the pressed steel alternatives used by lower-cost suppliers.

Hardware specification. Blum hinges and drawer runners are the standard used by quality Dubai fitout companies. Off-brand hinges often lose adjustment within 12-18 months, meaning doors drift out of level and soft-close stops functioning. According to Blum product specifications, their hinges are tested to 200,000 opening cycles versus 30,000-50,000 for generic alternatives.

Internal fittings. The base price covers the carcass and doors. Every drawer, pull-out trouser rack, shoe shelf section, and velvet-lined drawer is additional. A standard internal fitting package (2 drawer banks, 1 shoe shelf, integrated LED) adds AED 2,000-4,500. Specify fittings at the design stage — retrofitting after installation is significantly more expensive.

Finish type. Melamine is the base cost. Matt lacquer adds 30-50% to door cost. High-gloss lacquer or two-pack polyurethane adds 60-100%. Glass panels (clear, smoked, or frosted) add AED 400-900 per panel. The highest-value upgrade in most Dubai projects is from economy melamine to a quality matt lacquer.

Is Fitted Wardrobe Cost in Dubai Worth It vs IKEA PAX?

IKEA PAX is the default comparison. A fully configured PAX wardrobe at 250cm width, including interior fittings and sliding doors, costs AED 3,500-5,500 from IKEA UAE. Assembly by IKEA's service costs AED 350-600.

A custom-manufactured fitted wardrobe at 250cm to ceiling height in mid-range melamine costs AED 3,500-5,500 for the same footprint. The differences: the custom wardrobe is floor-to-ceiling (PAX stops at 236cm, leaving a visible gap in rooms with 270cm+ ceilings), uses MR-MDF throughout (PAX uses particleboard that is not moisture-resistant), and is professionally wall-fixed to the stud frame. The comparison favours custom at any ceiling height above 250cm, which covers most Dubai apartments and all villas. See the IKEA vs custom wardrobe guide for a full analysis.

Cost Savings on Fitted Wardrobes in Dubai That Hold Up

Three areas where cost reduction does not compromise quality:

Melamine finish instead of lacquer in secondary bedrooms. The finish has no impact on structural integrity. In a guest bedroom or utility room, the aesthetic difference between melamine and lacquer is not worth the cost premium. Reserve lacquer for the master bedroom.

Hinged doors instead of sliding where swing clearance exists. A good hinged door on quality Blum hinges will outlast an average sliding door on a pressed steel track. If the room layout allows the door to swing fully open, hinged doors at AED 900-1,200 per metre are a legitimate alternative to sliding at AED 1,400-2,200.

Selective internal fittings. The full internal fitting package includes items most households will not use frequently. Specify fittings that match actual daily use. A well-designed wardrobe with fewer but correctly specified fittings functions better than an overspecified one where half the fittings go unused. Contact us for a free design consultation.

Need help designing your perfect wardrobe or closet? Talk to us.

WhatsAppCall Now